The Martin Monster Mini is the only full suspension hard tire scooter available in the market today. Although there are limitations in the capabilities of the particular suspension setup of this scooter, the implementation is certainly novel.
- Motor: Chinese G23LH Clone
- Oil Mixture Ratio: 25:1
- Top Speed: 16-18 mph
- Range: 20 miles
- Clutch: Direct Drive, no clutch
- Transmission: Spindle drive
- Tension System: Engine protection washers and quick release
- Brakes: Front wheel caliper
- Wheels: Plastic
- Tires: 6" potmetal rims with nonremovable rubber tires, must replace whole unit
- Handlebars: Welded T-bar
- Suspension: Front and rear suspension
- Folding: slide tube
- Deck: wood
- Frame: High tensile steel
- Frame Protection: none
- Dry Weight: 25.5 lbs.
Really of little use on all but the smallest lumps in the road, Martin's suspension worked fairly for lighter riders but had trouble coping with larger loads, particularly due to the lack of adjustment in the important front suspension.
Due to awkward mounting positions on early units, front brakes had a tendency to bend, break and generally not provide sufficient braking. Later models redesigned the fork and had better, but still limited success due to the waxy surface of the tire sidewall.
Adjustable barrel carburetor with finger throttle. Early models suffered from sticky throttle cables pinched by the decks, some later ones had this remedied.
You'll never have to replaceEdit
You may eventually have to replaceEdit
You should immediately replaceEdit